Stainless steel bearings

Stainless steel bearing units are very suitable for the food industry and other demanding environments, due to the hygienic design and minimum maintenance. Our stainless steel bearings are characterised by high quality and finish for both the bearing and the bearing housing. 

Go directly to our product configurator

Stainless steel bearings for demanding environments

Stainless steel bearing units are very suitable for the food industry and other demanding environments, due to the hygienic design and minimum maintenance. They are mounted with SUC stainless steel bearings and set screw locking.

The bearing unit has adjustable pre-lubricated Aisi440C stainless steel ball bearing and can be re-lubricated using a stainless steel Aisi304 grease-nipple or a quick coupler. Also, the bearings can be fitted with a safety cap of either polypropylene or stainless steel AISI 304, with a rotary shaft seal ring (TC) with extra dust-protection lip of NBR rubber, and with a stainless-steel spring.

NG Bearings brochure thumbnail

Brochure: NG Bearings

For more information call us on +45 87 40 80 80 or send an e-mail at bj@bj-gear.com

 

4-bolt stainless steel flange bearings (SF)

  • Stainless steel housings AISI 304
  • SUC stainless steel bearings AISI 440C
  • Stainless steel grease nipple M 6x1 mm. Standard placement is right angle (0º). (Optionally with placement in 45º and 90º)
  • With screw set lock (optionally with eccentric collar lock)
  • Maintenance free except regularly greasing when needed
  • Operating temperature from -20° C to +120° C
  • No surface coating is required

2-bolt stainless steel flange bearings (SFL)

  • Stainless steel housings AISI 304
  • SUC stainless steel bearings AISI 440C
  • Stainless steel grease nipple M 6x1 mm. Standard placement is right angle (0º). (Optionally with placement in 45° og 90°)
  • With screw set lock (optionally with eccentric collar lock)
  • Maintenance free except regularly greasing when needed
  • Operating temperature from -20° C to +120° C
  • No surface coating is required

Stainless steel pillow block bearings (SP)

  • Stainless steel housings AISI 304
  • SUC stainless steel bearings AISI 440C
  • Stainless steel grease nipple M 6x1 mm. Standard placement is right angle (0°). (Optionally with placement in 45° and 90°)
  • With screw set lock (optionally with eccentric collar lock)
  • Maintenance free except regularly greasing when needed
  • Operating temperature from -20° C to +120° C
  • No surface coating is required