You don't have javascript enabled.
 

CMD Engrenages & Reducteurs, France.

We have a large stock of flexible couplings and claw couplings.

CMD's home page:
www.cmd-couplings.com

The Winflex coupling type T is suitable for the transfer of heavy strength and for an impact load.

The Winflex coupling type T consists of two hubs between which grease lubricated springs are inserted. A casing with sealing rings is fitted on the outside of the springs. Available in torque limits of up to 160,000 Nm and with a boring diameter of up to 270 mm.

When the springs are worn out later, they are replaced without dismantling the hubs which means that you can avoid aligning the coupling when servicing the unit.

We keep them on stock in an output torque of up to 24,000 Nm and with a boring diameter of up to 180 mm.
Type TL is provided with extended hub.
Beyond Winflex, CMD is producing claw couplings in up to 3,733 KNm and with a boring diameter of up to 820 mm.

CMD couplings type Winflex (Click to go to CMD´s website)

WINFLEX T.TL.TL2

WINFLEX BSA

WINFLEX CPF

We keep this coupling on stock up to type 16T.
From 90”“160,000 Nm. Max. boring diameter ø270 mm.

From 950”“160,000 Nm.
boring diameter ø270 mm.

From 950”“48.000 Nm.
boring diameter ø230 mm.

WINFLEX T.TL.NPE

WINFLEX BSAT

WINFLEX TDF

From 90”“12,500 Nm.
Max. boring diameter ø130 mm.

From 950”“160,000 Nm.
Max. boring diameter ø270 mm.

From 950”“24,000 Nm.
Max. boring diameter ø180 mm.

WINFLEX S

 

 

From 90”“12,500 Nm.
Max. boring diameter ø130 mm.

 

 

CMD gear coupling type senior

Senior S

Senior P-PA

Senior E

From 1,200”“165,000 Nm.
Max. boring diameter ø280 mm.

From 1,200”“165,000 Nm.
Max. boring diameter ø280 mm.

From 1,200”“165,000 Nm.
Max. boring diameter ø280 mm.

Senior ML-ML2

Senior DF

Senior V

From 1,200”“138,000 Nm.
Max. boring diameter ø250 mm.

From 1,500”“36,700 Nm.
Max. boring diameter ø170 mm.

From 1,200”“165,000 Nm. Max. boring diameter ø280 mm.

 CMD gear coupling type Z

FLEXIDENT Z

FLEXIDENT ZV

FLEXIDENT ZDF

From 1,200”“160,000 Nm.
Max. boring diameter ø350 mm.

From 1,200”“160,000 Nm.
Max. boring diameter ø350 mm.

From 1,200”“160,000 Nm.
Max. boring diameter ø290 mm.

FLEXIDENT ZP

FLEXIDENT ZE

FLEXIDENT Junior

From 1,200”“160,000 Nm.
Max. boring diameter ø350 mm.

From 1,200”“160,000 Nm.
Max. boring diameter ø290 mm.

Manufactured according to AGMA 561-1 standard.
From 700 Nm”“41,500 Nm.
Max. boring diameter ø180 mm.