You don't have javascript enabled.
 

Hydro-Mec helical bevel gearboxes X and C series

Description

Helical bevel gearboxes in X and C-series

Helical bevel gearboxes X-series X22S-X63A
Helical bevel gearboxes X-series X22S-X63A
Helical bevel gearboxes C-series 113C-134C
Helical bevel bearboxes C-series 113C-134C

BJ-Gear A/S supplies helical bevel gearboxes, carefully tested and approved.
The helical bevel gearboxes are in cast iron or aluminum and characterised by high power density and an efficiency of up to 96%. The helical bevel gearboxes are available as foot, flange or shaft gearboxes. They are available with solid output shaft or hollow output shaft for shrink fitting. The gearboxes are as standard supplied for IEC motors.

Ratios in the X-series from 5:1 to 589:1 and a max output torque on 410 Nm.
Ratios in the C-series from 7:1 to 821:1 and a max output torque on 1000 Nm.

See the various possibilities of gear ratios in the table below or download our detailed catalogue for further information on our helical bevel gear programme.

Helical bevel
gearbox Type

Ratios

Max.
output
torque
[Nm]

Housing design

Gear
weight
[Kg]

X22S

4.83 - 70.24

50

Aluminium

3.7

X32S

7.33 - 77.55

90

Aluminium

6.3

X33S

36.17 - 324.18

100

Aluminium

6.55

X42A

7.29 - 77.36

150

Aluminium

7.82

X43A

50.35 - 323.37

160

Aluminium

7.93

X52A

6.03 - 74.81

250

Aluminium

12.8

X53A

56.76 - 589.85

250

Aluminium

12.65

X62A

6.03 - 74.81

410

Aluminium

15.80

X63A

56.76 - 589.85

410

Aluminium

15.98

113C

7.94 - 86.09

675

Cast iron

38

114C

74.79 - 678.79

675

Cast iron

38

133C

9.69 - 104.22

1000

Cast iron

53.5

134C

91.23 - 821.70

1000

Cast iron

53.5

Features

Removable
inspection cover

Allows periodic inspection
of gearing during routine
maintenance

Gearboxes
Hardened and
ground gearboxes.

Alloy housing
Is vacuum impregnated
(MIL-STD 276) for protection
and sealing. No secondary
finish required but readily
accepts paint.


Oil seals
Two oil seals
on request

Single-piece aluminum (X-series)
Combines light weight with
high tensile strength.
Precision machined for
alignment of bearings
and gearing.

Cast iron housing (C-series)
With high tensile strength.
Precision machined for
alignment of bearings
and gearing.

Flange
Fully modular to IEC.

Link to 3D files

Helical Bevel Gearboxes

Ratios

Max.
output
torque
[Nm]

Link to Hydromec
gearbox configurator
(Requires login from Hydro-Mec)

X22S

4.83 - 70.24

50

X22S

X32S

7.33 - 77.55

90

X32S

X33S

36.17 - 324.18

100

X33S

X42A

7.29 - 77.36

150

X42A

X43A

50.35 - 323.37

160

X43A

X52A

6.03 - 74.81

250

X52A

X53A

56.76 - 589.85

250

X53A

X62A

6.03 - 74.81

410

X62A

X63A

56.76 - 589.85

410

X63A

113C

7.94 - 86.09

675

113C

114C

74.79 - 678.79

675

114C

133C

9.69 - 104.22

1000

133C

134C

91.23 - 821.70

1000

134C